產品詳情
簡單介紹：
Output waveform: Sine, Triangle, Square, Pulse 品牌：韓國EZ.DIGITAL
詳情介紹：
| 詳細介紹 | |
|
Wide frequency range : 0.02Hz to 2MHz Combination of analog and digital oscilloscope performance. Versatile waveforms : Sine, Triangle, Square, Ramp and Pulse sawtooth Low distortion factor less than 1% at 10Hz to 100kHz TTL leveled square wave output Linear sweep control from 1: 1 to 100 : 1 Variable symmetry to generate sawtooth and pulse waveform DC offset control Maximum attenuation of 20dB can be obtained |
|
| 功能描述 | |
| Output | waveform Sine, Triangle, Square, Pulse sawtooth, Ramp, TTL, CMOS |
| Frequency | range 0.02Hz~2MHz in the 7 ranges |
| Frequency | accuracy 【8% of full scale to 2MHz |
| Input | voltage 0 to 10V(DC + AC peak) |
| Frequency | variable range 100 : 1 or more |
| DC | offset 【10V(without load), 【5(with load) |
| Symmetrical | variable range 10 : 1 to 1 : 10 or more |
| Distortion | less than 1%(0.2Hz ~ 100kHz) |
| Rise / fall | time less than 100ns |
| Linearity | less than 1% up to 100kHz and less than 5% up to 2MHz |
| Output | TTL level |
| Rise/fall | time less than 25ns |
| Width | 1 : 1 to 100 : 1 |
| Rate | 20ms to 2s (50hz to 0.5Hz) |
| Internal | sweep linear |
| External | sweep by means of VCF input |
| Output | voltage 20Vp-p (open circuit), 10Vp-p(into 50з) |
| Attenuator | -20dB |
| Impedance | 50з 【 5% |
| Operating | environments 0∩～35∩, 85% RH |
| Range | for guaranteed 25∩【 5∩, 75% RH |
| Power | requirement AC 115 / 230V 【 10%, 50/60Hz |
| Power | consumption approx. 20W |
| Accessories | power cord, fuse, operation manual, BNC cable |
| 物理特性 | |
| 長度 | 260mm |
| 寬度 | 210mm |
| 高度 | 76mm |
| 持有證書 | |
| CE | |
